Cuvée Chicago
  • Home
  • DIY
  • Design
  • About me
  • Contact
Cuvée Chicago
  • Home
  • DIY
  • Design
  • About me
  • Contact
Houseplants

Tips For Storing Elephant Ear Bulbs for the Winter

by Clarence Santangelo March 14, 2023

Hey folks. My wife has been begging me to put this article together, so here it is!

Wondering what to do with your elephant ear plants as the weather gets cold? As much as I love these tropical beauties, they simply can’t handle frosty temperatures.

Good news is you can store their bulbs for the winter and have them back again next year. So, let me take you through the process of digging up and storing elephant ear bulbs for the winter.

Let’s get started with digging.

Preparations & digging

Hey there, let’s make sure your elephant ear plants stay kickin’ it for seasons to come.

To start, let’s grab a pair of gloves, a shovel, and a bucket—we’re gonna need these to safely dig up your plants. Next, we want to choose a good day when it’s not raining and the soil is dry. Trust me, digging in wet soil is a pain in the neck.

You should also think about where to store the elephant ear bulbs for the winter. Somewhere cool and dry is ideal—like a garage, basement, or closet. You can even bring the plants inside and put them in some containers over the winter so you never have to say goodbye.

Once you’ve got all your gear and plans sorted, let’s get to digging. Start by digging around the plant in a circle that’s about 6-8 inches deep. Then, gently pop the plant out of the soil and give it a little shake to shed any extra dirt. Cut off any dead leaves and trim the stems.

Finally, chuck the bulbs into your bucket and you’re good to go! We’ll talk next about keeping your bulbs in a good condition over the winter.

Storing your elephant ear bulbs

Alrighty, now let’s go over how to keep those bulbs healthy over the winter. First off, give them a good scrub down to remove any dirt or debris that’s hanging around. Use your hands or a soft brush, there’s no need to break out the power tools here!

Now, it’s time for storage. You want to find a place that’s dry and cool – not too wet, but not too dry either. Your best bet is a spot with good ventilation like a garage, basement, or closet. It’s important to store them in a breathable container like a paper bag, a mesh bag, or even an old pillowcase.

Here are some tips to make sure your bulbs stay healthy and happy:

  • Try to keep the storage temperature between 50-60°F.
  • Check the bulbs periodically to make sure they’re not rotting or drying out.
  • If you notice any rotting or mold, be sure to remove the affected bulbs immediately.
  • If the bulbs are starting to look shriveled, try misting them lightly with water to add some moisture back in.
  • Keep an eye out for pests too. If you spot any creepy crawlies, dispose of them right away.

Replanting your bulbs

When I first started planting these guys, I thought it would take three to four years to get a bulb. But, surprise! Guess what? These furry green clusters pop up and grow in a single season. Crazy, huh?

Anyhow, here’s what you need to do to replant these lovely, tropical plants come springtime:

Start by assessing the weather. You want to make sure there’s no chance of a pesky frost. The best time to replant (unless you’re in some fancy, tropical locale) is after May, when the last icy breath of winter has disappeared.

Find a spot with good drainage, plenty of sunlight, and well-drained soil. Once you’ve found a spot, dig a hole that’s twice the size of the bulb you plan on planting.

Place the bulbs in the hole with the pointy end facing up and the roots going down into the soil. Then, cover the bulbs with soil and press down to firm it up.

Lastly, give your plants some water to start their new life. Be sure to give them extra care for the first few weeks to help them get established in their new home.

That’s it! Now you know how to replant your elephant ear bulbs and have them looking gorgeous and tropical in no time. Let us know in the comments if you’ve grown these beauties before and what worked for you!

The Spruce helped us out a lot with writing this article, so hats off to those folks!

March 14, 2023 0 comment
DIY

Pressure Washer Maintenance

by Clarence Santangelo September 17, 2020

So before I teach you guys how to use a pressure washer, I want to make sure you can maintain it once you have it. This might sound a little backwards, but I think you’ll actually learn quite a bit about how they work and how to use them by learning about how to take care of them.

Once I get you started using your pressure washer I’m pretty sure you’re not going to care about maintaining them anymore because you’re just going to be out there firing away at everything, so let’s get this settled right now.

Maintaining your pressure washer

Okay, there are some other reasons you might want to learn about pressure washer maintenance beyond just learning how to use it. Maybe you already know! Either way, we’ll walk through it together and if you have any questions just get in touch!

How you maintain your pressure washer is going to depend on lot on which kind you have: gasoline-powered or electric. The gas-powered pressure washers tend to need a bit more TLC than their electric counterparts, and believe it or not the manual that came with your pressure washer (most likely available online because I’m sure you threw the thing out) has pretty good information in it.

Maintenance is an ongoing battle against mother nature (and father science), so just make sure to instill these habits from the start and you shouldn’t have any issues. If you keep up the habits, you won’t even have to get it serviced!

I’ll break this down into two parts, before using your power washer and after using your power washer.

Maintenance before using your pressure washer

  • Check your o-rings. You want to look at the O-rings to see if they’re leaking, you’re looking for tears or other external damage or sign of weakening. You can’t repair these you just have to replace them if you notice any problems and it’s a pretty good idea to. If you don’t they can cause leaking which causes damage to the machine or even to you, so be careful and check those rings!
  • Check your hose. Like the O-rings, you’re looking for external damage and for the same reasons. It is possible to repair a hose, but it’ll usually cost you the same price as getting a new one. Check in with your manufacturer and see if they’d be willing to ship out one to you for free.  It’s worth a shot.
  • Examine the spray gun & nozzle. You want to see if the spray trigger has normal action and full range of motion. For the nozzle you want to see if it’s clogged (make sure the machine isn’t connected, thank you very much). If it is, you can often get out the debris by soaking in some vinegar, but if it’s damaged, just replace it.
  • Check the oil and gas. The gas shouldn’t be sitting in there for a year, but if it is you can add some more gasoline and stabilizer to fix it up. The oil shouldn’t be dark, and if you aren’t sure, just give it a change. You typically want to change out the oil after 40 or so hours of operation.

Here’s a quick video that goes over some of the basics of pressure washer maintenance for visual learners:

Maintenance after using your pressure washer

  • Turn-off the pressure washer. Before you do anything else, make sure your machine is disconnected from power and water.
  • Clean the detergent injector. Just rinse this out with water and make sure there isn’t any scum forming.
  • Push all water out. Especially important in the winter, but you don’t want to store your machine with any water in it at all. It’s no fun spraying pressurized mold.
  • Add stabilizer. If you aren’t going to be using your gas machine for a while, add some stabilizer to the fuel now so you don’t need to later. I usually have some gaffer’s tape that I write the current date on so I know when I last used it and added stabilizer. If you don’t have stabilizer, drain that fuel out if you won’t be using it. The more fuel you have in the tank, the longer it can last in there because there’s less air volume. After adding stabilizer always run the engine for at least 10 minutes to make sure it’s run through completely.
  • Store in a safe place. Storing your pressure washer like it’s a beloved car (or pet, or anything else beloved) is going to go a long way in prolonging its life. Keep it dry, not too cold, basically just use common-sense. If you’re storing it with gasoline in the tank, make sure it’s well-ventilated away from any sources of heat. Also it’s nice to cover it to keep out dust, but keep in mind plastic sheets aren’t great because they can keep the engine moist, we want dry airflow.
  • Before cleaning the engine: always let the engine cool for at least half an hour. Clean the external surfaces, touch up paint if needed to prevent corrosion.

 

Hope this helps! If you guys have any other tips to add, please get in touch and I’ll be happy to add them.

September 17, 2020 0 comment
Load More Posts

About Me

About Me

Meet The Man

Hey there! I'm Clarence Santangelo and it's my pleasure to share this journey with you.

We're going to craft, we're going to make some repairs, and you know that we're going to make some mistakes, but that's okay as long as we're learning together!

Join the mailing list

Subscribe to our newsletter to stay in touch and join the team!

Recent Posts

  • Tips For Storing Elephant Ear Bulbs for the Winter

    March 14, 2023
  • Pressure Washer Maintenance

    September 17, 2020

Categories

  • DIY (1)
  • Houseplants (1)

What we’re building

banner
I'm absolutely blessed to be surrounded by family and friends in this hard time, but for those who aren't we're building a community of DIY enthusists.

If you've never made anything for yourself before, I'll guide you through it, don't worry! Join the community and let's get to work.

Popular Posts

  • 1

    Pressure Washer Maintenance

    September 17, 2020
  • 2

    Tips For Storing Elephant Ear Bulbs for the Winter

    March 14, 2023

Newsletter

Subscribe my Newsletter for new blog posts, tips & new photos. Let's stay updated!

@2020 - All Right Reserved. Made proudly in Chicago. Our privacy policy.


Back To Top